AudioControl Matrix Plus Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Tournevis électriques AudioControl Matrix Plus. AudioControl Matrix Plus Install guide Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 9
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
®
®
making good sound better
®
Six Channel Ultimate Performance
Line Driver
Let the Good Sounds Start!
You have just purchased an ultimate-performance autosound product;
the AudioControl Matrix Plus six channel line driver. The Matrix Plus
allows you to utilize every last bit of performance and sound quality that
you’ve always strived for from your vehicle’s sound system. So nd a nice
dry spot (we can’t recommend any near us), take a load off and spend a
few moments reviewing this Enjoyment Manual. Here we go!
Features of the Matrix Plus:
• High signal voltage capability:
13 volts peak output
• 24 dB of gain
• Six channels of input and output
• Balanced differential inputs
• Low-impedance outputs
• Optional Remote Level Control
(ACR-1)
• PFM Subsonic lter
• Output level controls
• Ultra-low distortion, ultra-quiet
operation
• Selectable ground isolation
• Optimum voltage indicator LED’s
FEATURES AND HIGHLIGHTS
High-Voltage Line Driver
The Matrix Plus is a pre-amp line driver that takes the input signal from
up to three source units, increases it (up to 13 volts peak) and then delivers
it downstream. No more low signal output voltages to allow noise into the
rest of your performance car audio system.
Six Channel Inputs & Outputs
The Matrix Plus was designed for ultimate pre-amp exibility. With
that in mind we have provided six channels for input and six for output!
For even more exibility, the Matrix Plus inputs can be linked internally
whereby one input channel can feed one, two, or three output channels.
Balanced Inputs
The Matrix Plus features balanced differential input circuit that rejects
noise that radiates into the signal path between the source unit and your
Matrix Plus. Even better, this circuit uses standard RCA connectors.
Anti-Oscillation Output Circuitry
Driving long lengths of cable can present a nasty capacitive load to
the source that has to drive them. This capacitance can cause instabilities,
which can lead to oscillations, radio interference and excessive system
hiss. The Matrix Plus’s low-impedance, high-current output circuitry easily
handles long cable runs without their associated problems.
Output Voltage Indicators
Setting voltage levels for optimum signal-to-noise performance can be a
real pain - especially when you have to get out the old digital voltmeter and
nd a way to make those probes stay put while you try to read the dancing
LCD display. With the Matrix Plus’s voltage indicator LED’s, you can say
good-bye to that headache. Just turn the Matrix Plus gain control until your
favorite light ickers and you’re done!
- 2 -
Vue de la page 0
1 2 3 4 5 6 7 8 9

Résumé du contenu

Page 1 - Line Driver

®®making good sound better®Six Channel Ultimate Performance Line Driver Let the Good Sounds Start! You have just purchased an ultimate-performance

Page 2 - The Outside

Selectable Ground IsolationAvoiding ground loops and grounding-related noises are of paramount importance in any installation. For this reason we have

Page 3

- 5 -137654928- 6 -7. 1, 2, & 5 Volt: These lights will tell you when the signal level is at 1 volt, 2 volts or 5 volts. You’ll most likely want

Page 4 - - 7 - - 8

12. Channel Linking: To link the Main input to Ch 2 and 3 outputs, move the main jumper to the (opposite) position to enable the linking function. The

Page 5 - Quick Install Guide

Quick Install Guide Since some of you will want to install your Matrix Plus on your own we offer a few reminders in the following short section to spe

Page 6 - Six-channel Source Unit

Six-channel Source Unit Head units with separate front, rear and subwoofer outputs are easily accommodated with the Matrix Plus.- 11 - - 12 -

Page 7 - Maximum SPL System

Maximum SPL System The input channel linking feature allows the Matrix Plus to receive a two channel signal and produce six channels of output.- 13

Page 8 - The WARRANTY

The WARRANTYPeople are scared of warranties. Lots of ne print, lots of noncoopera-tion, months of waiting around. Well, don’t be scared of this warra

Page 9 - SPECIFICATIONS

P/N 9131110making good sound better® 22410 70th Avenue West • Seattle, WA 98043 425-775-8461 • Fax 425-778-3166 • www.audiocontrol.com®Matrix Plus S

Commentaires sur ces manuels

Pas de commentaire